|
Lets Dig in and Do Our Part
|
Surviving,
is the word describing our plight during these difficult economic
times. While the mass media and our President decry our situation as
the worst since the great depression and are committed to borrow and
spend, many citizens think the opposite, I find many who believe the
American spirit will persevere however it is done.
As for me,
I believe the period of the first oil embargo and very high interest
rates of prime around 20%, was much worse economically than
today. We found a way, adjusted and found many years of prosperity
followed.
I recently visited several of our customers at their
locations, mostly in the West and found them to be looking forward to
“09 with good spirit and intending to Fill Up their Glass. I have
talked by telephone with several in the East and found the same spirit.
How are they coping?
It
is the cold season, really cold and lots of snow all around. Some have
found ways of plowing snow to keep key employees on however most are
conducting a review of their equipment, servicing and repairing as
needed. All were taking a critical look at the possible work available
and studying how each machine or tool may fit in during ’09.
I
was very pleased to note that when the Orbital Action Screening Plant
had been added to their available machine list, new opportunities had
surfaced and acted upon. Most were looking at additional opportunities
appearing due to the versatility and mobile capabilities of their Orbit
Screen. The task of marketing their new abilities was being implemented
with enthusiasm.
In short, they are Digging In, looking at other
areas of work and planning to Fill UP their Glass. I ask, how can
we help you fill yours?
Happy screening
Brad Schnittjer
Blog # 5
3/2/2009
|
I
will continue my
comments about the many advantages of Orbital Action Screening in my
next Blog. Meanwhile, look over our Videos and Job Stories
to learn more about Orbital Action Screening. Our products, with their
user friendly features and high performance levels could take you into
a new season with a much higher profit potential.
Send
us your requirements by filling out and submitting the Intended
Use Form
and you will soon have full details and a quote for the correct model
and available options to fulfill your job application needs
“The
Finer Cut”, is Brad’s Blog. Each issue will cover a topic of interest
about our machines, our industry, our customers and more. I am excited
about the opportunity to use a Blog to broaden our communications with
our customers and industry. I invite you to return and visit from time
to time, cruising through previous issues to learn many details
regarding our products.
I
also invite you, our reader to contribute by offering your comments.
Please send your thoughts to brad@orbitscreens.com, by letter or fax, 563-922 9060.
|
|
|